|
TYPE OF USE:
MOTUL ENGINE CLEAN is designed to be used in all types of Diesel and gasoline engines with
injection or carburettor(s), with or without catalytic converter, using all kind of fuel. MOTUL ENGINE
CLEAN effectively cleans dirtying and clogging which appear in the engine. The removed micro particles are then evacuated at the time of the oil drain. MOTUL ENGINE CLEAN provides a perfect
lubrication during cleaning process.
PERFORMANCE
MOTUL ENGINE CLEAN, added to engine oil before draining, allows to :
- Lower the wear
-Decrease oil and fuel consumption
-Increase compressions on the same way on all the cylinders
-Decrease exhaust pollutants emissions
- Evacuate deposits, varnishes and other combustion residues from problem areas such as
hydraulics lifters or piston grooves and rings
-Take advantage of fresh oil which will fill engine after draining
- Increase catalytic converter's lifetime
RECOMMENDATIONS
Before each oil drain, add, in the engine, a can of ENGINE CLEAN to hot used oil. Let the engine run at
idle for 15 minutes. Drain the oil and change the filter.
The content of one can is sufficient for an oil capacity up to 5 liters. For higher capacities, 60 ml of
ENGINE CLEAN is to be added per supplementary liter of engine oil (over 5 liters) . Do not exceed the
recommended proportion. If necessary, proceed to 2 successive treatments.
Combined with DIESEL SYSTEM CLEAN or FUEL SYSTEM CLEAN, ENGINE CLEAN provides a very
appreciable reduction of pollutants emissions to pass Vehicle Inspection.
PROPERTIES
Color Red
Density at 20C NF T 60 101 0.824
Flash point NF T 60 118 40C
|
